Tenda TEF1118P Switch 16-Ports PoE + 1 GE+1 SFP Unmanaged

IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af

≥100,000hours

16*Link/Act per device
1*G1 Link/Act per device 
1*SFP Link/Act per device 
1*PoE-MAX per device 
1*Power per device

16 10/100Base-TX ports(Data/Power) 
1 10/100/1000Base-T port(Data) 
1 1000Base-X SFP port

6KV

Yes

7.2 Gbit/s

5.36Mpps

4K

Port 1 to Port 16 support IEEE802.3at/af POE standard

1 2 4 5 +，3 6 7 8 -

AC：100-240V～ 50/60Hz

294*178*44mm( W x D x H )

in full configuration：<150W
PoE Max Power Supply：135W

CCTV： 1-8 ports support QoS，If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device，like the monitoring computer. This ensures smoother monitoring video playback. 
Standard： The switch’s functions are similar with a common unmanaged switch’s and all the ports of the switch can communicate with each other.
VLAN： In this mode, 1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts.
Extend： In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.

Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing